Products

DRAWNPLATES GRINDING MACHINE

model DP 80

The ideal machine for the reconditioning of small size dies. The 6 plates allow very high productivity and efficiency.
CHARACTERISTICS & TECHNICAL SPECIFICATIONS:
- 6 needles drawn plates grinding machine
- Continuously adjustable RPM
- Height of drawn plates: singly adjustable
- Silent movement by means of a single motor
- No lubrication required
- Recovery plate of boron carbide
- Range of diameter: 0.20-10.00 mm (0.008"-0.400")
TECHNICAL FEATURES
Centers tubes RPM Min. 200 - Max 1050
Dies spindles RPM Min. 80 - Max 420
Centers strokes RPM Min. 53 - Max 280
Overall dimensions mm. 615 - 420 - 500 height
Net weight 153 kg.
DIE POLISHING MACHINE
No vibration and silent chuck whit vices
self-balance
self-braking motor

model 80 , model 90

TECHNICAL FEATURES
Spindle 3600 RPM
Motor 2800 RPM
Motor power 0.8 HP
Vice 28/43/53/75 mm
Weight 27 kg
Dimensions 400x300x20 mm

model NG 80

 

NEEDLE GRINDING MACHINE
This machine is required to repair needles for the drawn plates grinding machine. Provided with graduated scale for angles with hardened and ground guides. Stopper. High sensibility carriage mounted on ball bushings.
TECHNICAL FEATURES
Grinding wheel 155x20 mm
Vice for 14 mm. dia. needle
Grinding wheel 4130 RPM
Needle 1400 RPM
Grinding wheel motor 0.5 HP
Needle motor 0.35 HP
Weight 90 kg
Dimensions 700x500x400 mm
  DIE
PROFILER
2000
VASSENA Technology
the ultimate technology in die manufacturing
 
Ultra high speed spindle with diamond tool allows very fast grinding of working angle and bearing.

 

DIE
PROFILER
2000
This machine has been developed for high efficiency manufacturing new dies and reconditioning used dies.
The grinding operation is very fast as it is obtained by means of a special diamond tooll roating at very high speed (up to 42000 RPM).
The work is rotated opposite to the diamond cutting tool.
DIE PROFILER 2000 con repair the conical part and bearing (parallel part) of a die in a very short time and very precisely.
The machine, equipped with digital micrometers, is extremely precise, able to produce working angle and bearing exactly according to be specification.
The optimum range of diameters is between 1.5 and 12 mm, but with smaller diamond tool it is possible to manufactur dies down to 0.6 mm.
The machine is equipped with a dust collection unit to prevent dust in the environment.

Details of the angle scale
adjustment (working angle from 0° to 45°)

 

 

 

Semi-automatic tungsten carbide wire drawing die grinding machine for reworking of the bell radius, entrance and approach angles, bearing section and back relief sections.  
  DIE
PROFILER
2000