Products

Dry and wet lubricants for cold heading quality wire (CHQ)
Panlube properties characteristics surface preparation
S14 calcium lubricant for the predrawing before annealing, good lubrication pickled and lime coating or mechanical descaling
S209 calcium lubricant for the predrawing before annealing. leaves very low residual after the furnace. shot blasting or pickling and lime
S2860T Polymer lubricant for the predrawing before annealing . leaves ZERO residual after the furnace shot blasting or pickling and lime
S933 calcium sodium lubricant for the predrawing, 1-3 dies before annealing pickled and lime coating or pickled and phosphate coating
S2800V calcium aluminium lubricant in combination with PANCOVER. This products leave a low residual and promote high performance in cold heading operations. acid pickling, phosphate coating, lime or reactive stearate coating.
S2920V calcium sodium lubricant
S1300 reactive stearate water soluble for the preparation of reactive lubrication bath after annealing , pickling and phosphate coating after phosphate coating
S1470 sodium lubricant with medium content of fatty acids - low melting point for the final calibration after annealing and phosphate coating annealing + phosphate and lime / phosphate and soap coating / polymer coating
S1531 Sodium lubricant with high content of fatty acids
G4210 jelly - paste for the final calibration after annealing - bright finishing phosphate and lime
L3102 lubricating oil with EP additives. different viscosity to cover different applications and materials. EP additives for the final calibration before the forming operation. Fully compatible with the heading oil. 1. acid pickling and coating.
2. in line shot blasting
L3104
L3106