Products

Panlube      
L3251 very viscous oil with high content of EP additives calibration for single or multipass drawing with high reduction of round or profiled bars precoating by PANCOVER 4700, 4730, 4770, required only for heaby duty applications (deep forming, cold harding, profiles).
L3252 high viscous oil with high content of EP additives
L3254 medium viscous oil with high content of EP additives
L3104CF chlorine free recommended for the calibration in line to the annealing furnace annealed
G4200 viscous paste with E.P. additives grease developed to be used on a single pass, providing bright finishing and residual film easy to be removed. not required or PANCOVER coating for heavy duty application
L3803 water soluble oil to be used at high concentration for rolling operation for profiles tube forming by rolling
L3012 water soluble semisynthetic oil for stainless steel rolling for flat strip production . Very easy to be removed with the standard UTS or electrolytic systems annealed
L3220CF chlorine free low viscosity oil to be used for the wet drawing in the production of fine wire 1. wet drawing.
2. not rquired or PANCOVER coating for heavy duty application
L3134 very low viscosity oil calibration of fine wires in line to the annealing furnace wet drawing
Panchem      
4528 degreasing agents special liquid product for the preparation of acid degreasing solution suitable for UTS or electrolytic systems for annealed wires before phosphate coating. wire from drawing operation
5200 degreasing agents special liquid product for the preparation of alkaline degreasing solution in line to the annealing furnace
5020 neutralising and passivating agent anti rusting coating for stainless steel 400 series, to be used after acid pickling and rinsing to provide anti rusting action acid pickling and rinsing